Battery-Swap Connectors

Multi-pin blind-mate, high-current battery-swap connectors, meeting the fast battery-swap requirements of EV swap stations.
Applications:EV battery-swap stations
Reference specifications
Published by the original manufacturer and shown here for selection reference. Contact us to confirm the exact specification of the part we supply.
Recodeal fast-swap connector (Replacement connector)
Source: Recodeal · Checked 2026-10-08- Floating amount
- X, Y direction ±5 mm · Z direction 0–10 mm
- Terminals
- 2 high-voltage terminals · 1 ground terminal · 10 signal terminals · 2 low-voltage auxiliary power supplies
- Rated current
- 300 A
- Rated voltage
- 750 V DC
- Mating cycles
- More than 5000 plug-in cycles
- Waterproof class
- IP67
- Operating temperature
- −40 ℃ … +125 ℃
- EMI shielding
- Shield: optional · compatible with battery shielding function
- High-voltage interlock
- Optional
- Applications
- Metal alloy support panel combining power and control-signal transmission, with X/Y/Z three-axis floating tolerance correction and guide alignment · mainly used in vehicle battery packs and the vehicle power input and power-communication control system
Original models — Recodeal fast-swap connector
Source: Recodeal · Checked 2026-10-09Original manufacturer part numbers, listed for reference only. These are not LTconnector part numbers; ask us whether we can supply a given number.
- Replacement connector
- Recodeal replacement connector (the only model under the Fast swap connector section; the page gives no finer ordering code)
Original part numbers — JAE floating high-current charging connectors (DW15 / DW07) (JAE product site, all 6 with a JAE description)
Source: JAE product site (products.jae.com) · Checked 2026-10-09Original manufacturer part numbers, listed for reference only. These are not LTconnector part numbers; ask us whether we can supply a given number.
- DW07S01BAG1
- High-current Busbar Connector, Floating connection, Flexible Current Amount, Applicable busbar thickness: 3 mm, Socket
- DW07S01BAG2
- High-current Busbar Connector, Floating connection, Flexible Current Amount, Applicable busbar thickness: 4 mm, Socket
- DW07S01BAG3
- High-current Busbar Connector, Floating connection, Flexible Current Amount, Applicable busbar thickness: 5 mm, Socket
- DW07S01BAG4
- High-current Busbar Connector, Floating connection, Flexible Current Amount, Applicable busbar thickness: 6 mm, Socket
- DW15P02CAG1
- Floating Connector for Autonomous Robot Charging, Fixed side, 2 pos., Busbar, Pin Connector
- DW15S02CAG1
- Floating Connector for Autonomous Robot Charging, Floating side, 2 pos., Socket Connector
FAQ
How do I check if a Battery-Swap Connectors series matches my current part?
Search by brand or part family using our Cross-Reference Finder, or contact us directly with your current part number -- we'll verify compatibility before recommending a match.
Can Battery-Swap Connectors be customized to a specific spec I need?
Yes. When no exact match exists in our catalog, our manufacturing partners can custom-build a solution to your exact requirement.
Do you provide samples for Battery-Swap Connectors before mass production?
Yes -- we provide samples for your validation before moving to mass supply, so you can confirm fit and function first.
For detailed datasheets or cross-reference comparisons for this series, please contact our technical team.
Don’t see the exact spec you need? See custom manufacturing options →
You May Also Need

High-Voltage EV Connectors
800V/1000V high-voltage, high-current connectors for electric vehicle power battery and drive system interconnects.

Manual Service Disconnects (MSD)
Manual service disconnect switches for EV high-voltage systems, used to safely disconnect the high-voltage circuit during maintenance.

Cell Connection Systems (CCS)
Battery module cell connection systems integrating busbars and signal-sensing harnesses, used for internal power battery pack connections.