バッテリー交換用コネクタ

多極ブラインドメイト式の大電流バッテリー交換用コネクタで、電気自動車のバッテリー交換ステーションの迅速な交換ニーズに対応します。
用途:電気自動車のバッテリー交換ステーション
参考仕様
以下はメーカーが公開している仕様で、選定の参考としてご覧ください。当社が供給する品番の正確な仕様については、お問い合わせください。
Recodeal 交換用コネクタ(Replacement connector)
出典: Recodeal · 確認日 2026-10-08- Floating amount
- X, Y direction ±5 mm · Z direction 0–10 mm
- 端子
- 2 high-voltage terminals · 1 ground terminal · 10 signal terminals · 2 low-voltage auxiliary power supplies
- 定格電流
- 300 A
- 定格電圧
- 750 V DC
- 挿抜回数
- More than 5000 plug-in cycles
- 防水等級
- IP67
- 動作温度
- −40 ℃ … +125 ℃
- EMIシールド
- Shield: optional · compatible with battery shielding function
- High-voltage interlock
- Optional
- 主な用途
- Metal alloy support panel combining power and control-signal transmission, with X/Y/Z three-axis floating tolerance correction and guide alignment · mainly used in vehicle battery packs and the vehicle power input and power-communication control system
Original models — Recodeal fast-swap connector
出典: Recodeal · 確認日 2026-10-09以下はメーカー品番で、参考情報です。当社の品番ではありません。特定の品番を供給できるかどうかは、お問い合わせください。
- Replacement connector
- Recodeal replacement connector (the only model under the Fast swap connector section; the page gives no finer ordering code)
Original part numbers — JAE floating high-current charging connectors (DW15 / DW07) (JAE product site, all 6 with a JAE description)
出典: JAE product site (products.jae.com) · 確認日 2026-10-09以下はメーカー品番で、参考情報です。当社の品番ではありません。特定の品番を供給できるかどうかは、お問い合わせください。
- DW07S01BAG1
- High-current Busbar Connector, Floating connection, Flexible Current Amount, Applicable busbar thickness: 3 mm, Socket
- DW07S01BAG2
- High-current Busbar Connector, Floating connection, Flexible Current Amount, Applicable busbar thickness: 4 mm, Socket
- DW07S01BAG3
- High-current Busbar Connector, Floating connection, Flexible Current Amount, Applicable busbar thickness: 5 mm, Socket
- DW07S01BAG4
- High-current Busbar Connector, Floating connection, Flexible Current Amount, Applicable busbar thickness: 6 mm, Socket
- DW15P02CAG1
- Floating Connector for Autonomous Robot Charging, Fixed side, 2 pos., Busbar, Pin Connector
- DW15S02CAG1
- Floating Connector for Autonomous Robot Charging, Floating side, 2 pos., Socket Connector
よくある質問
バッテリー交換用コネクタシリーズが現在お使いの型番と一致するかどうか、どのように確認できますか?
クロスリファレンス検索でブランドやシリーズ名から検索いただくか、現在の型番を直接お送りください。適合性を確認した上でマッチする製品をご案内します。
バッテリー交換用コネクタを具体的な仕様に合わせてカスタマイズできますか?
はい。既存の製品カタログに完全一致する製品がない場合、提携工場でお客様のご要望に合わせたカスタム製造が可能です。
バッテリー交換用コネクタは量産前にサンプルを提供してもらえますか?
はい——量産供給前にサンプルをご提供し、寸法・機能をご確認いただいた上で量産をご検討いただけます。
このシリーズの詳細な仕様書やクロスリファレンス比較については、技術チームまでお問い合わせください。
ご希望の仕様が見つかりませんか? カスタム製造オプションを見る →
