Manual Service Disconnects (MSD)

Manual service disconnect switches for EV high-voltage systems, used to safely disconnect the high-voltage circuit during maintenance.
Applications:EV high-voltage system maintenance
Reference specifications
Published by the original manufacturer and shown here for selection reference. Contact us to confirm the exact specification of the part we supply.
Recodeal Manual Service Disconnector (MSD) series
Source: Recodeal · Checked 2026-10-08- Purpose
- Used on new-energy EV battery packs or PDUs to quickly disconnect the high-voltage circuit for technician safety during repair or emergencies · a fuse can be integrated inside to protect downstream equipment in a short circuit
- MSD1
- Rated current 250 A · fuse voltage up to 1000 V DC · fuse current 160–400 A(1000 V DC)/ 160–630 A(750 V DC) · handle lock · HVIL: yes
- MSD2
- Rated current 250 A · fuse voltage up to 750 V DC · fuse current 160–630 A · handle lock · HVIL: yes
- MSD3
- Rated current 200 A · fuse voltage up to 500 V DC · fuse current 160–400 A(500 V DC) · handle lock, small size · HVIL: yes
- MSD4
- Rated current 250 A · fuse voltage up to 750 V DC · fuse current 160–630 A(750 V DC) · screw lock · HVIL: yes
- MSD5
- Rated current 250 A · fuse voltage up to 750 V DC · fuse current 160–630 A(750 V DC) · screw lock, low-cost solution · HVIL: no
- MSD7
- Rated current 250 A · fuse voltage up to 750 V DC · fuse current 250–400 A(750 V DC)/ 250–500 A(500 V DC) · handle lock, insert-slot contact
- MSD9
- Rated current 200 A(30 分钟过载 300 A) · fuse voltage up to 500 V DC · fuse current 40–630 A(500 V DC) · handle lock, insert-slot contact · HVIL: yes
- Waterproof class
- IP6K9K, IP68, etc. · anti-mistouch design IPXXB (not stated on the MSD5 page)
- Operating temperature
- −40 ℃ … +125 ℃ (not stated for MSD7)
TE AMP+ MSD
Source: TE Connectivity · Checked 2026-10-08- Rated voltage
- 450 V DC (fused version) · 1000 V DC (shunt version)
- Rated current
- Determined by fuse selection, limited to 240 A maximum continuous at 65 ℃ ambient · fuse rating up to 630 A
- Operating temperature
- Operating −40 ℃ to 65 ℃ · storage −40 ℃ to 85 ℃
- Waterproof class
- Mated: IPX7, IP6K9K · unmated: IP2XB
- Mating cycles
- Tested to 50 cycles
- Locking
- Finger-actuated 2-stage lever assist · no tool required to unmate · 2× integrated internal HVIL · M6 stud
- Standards
- USCAR-2 · USCAR-37 · IEC 60529 · RoHS
- Applications
- HV battery pack-to-pack
Amphenol Industrial MSD XL
Source: Amphenol Industrial · Checked 2026-10-08- Rated voltage
- 1,500 V DC (max.)
- Rated current
- 300 A
- Waterproof class
- IP67 · IP6K9K
- Operating temperature
- −40 ℃ … +50 ℃
- Flammability
- UL94V-0
- Standards
- USCAR-2 · USCAR-37 · LV-215 · RoHS
- Variants
- Integrated internal HVIL with two-stage lever · cooling structure · high-current contacts using Amphenol Radsok technology · tool-free disconnection · front or rear mounting · safe-to-touch high-voltage contact surfaces
Original models — Recodeal manual service disconnects
Source: Recodeal · Checked 2026-10-09Original manufacturer part numbers, listed for reference only. These are not LTconnector part numbers; ask us whether we can supply a given number.
- MSD1
- Manual maintenance switch (MSD1)
- MSD2
- Manual maintenance switch (MSD2)
- MSD3
- Manual maintenance switch (MSD3)
- MSD4
- Manual maintenance switch (MSD4)
- MSD5
- Manual maintenance switch (MSD5)
- MSD7
- Manual maintenance switch (MSD7)
- MSD9
- Manual maintenance switch (MSD9)
- 说明
- The TE AMP+ MSD and Amphenol MSD XL manufacturer pages list no ordering numbers (the TE page only gives datasheet number 8-1773462-2), so only Recodeal model names are listed here
FAQ
How do I check if a Manual Service Disconnects (MSD) series matches my current part?
Search by brand or part family using our Cross-Reference Finder, or contact us directly with your current part number -- we'll verify compatibility before recommending a match.
Can Manual Service Disconnects (MSD) be customized to a specific spec I need?
Yes. When no exact match exists in our catalog, our manufacturing partners can custom-build a solution to your exact requirement.
Do you provide samples for Manual Service Disconnects (MSD) before mass production?
Yes -- we provide samples for your validation before moving to mass supply, so you can confirm fit and function first.
For detailed datasheets or cross-reference comparisons for this series, please contact our technical team.
Don’t see the exact spec you need? See custom manufacturing options →
You May Also Need

High-Voltage EV Connectors
800V/1000V high-voltage, high-current connectors for electric vehicle power battery and drive system interconnects.

Battery-Swap Connectors
Multi-pin blind-mate, high-current battery-swap connectors, meeting the fast battery-swap requirements of EV swap stations.

Cell Connection Systems (CCS)
Battery module cell connection systems integrating busbars and signal-sensing harnesses, used for internal power battery pack connections.