Technical Guides

Practical selection guidance for engineers evaluating connector options. RSS

Filter by:

Industrial & Circular Connectors

Military Circular Connectors Compared: MIL-DTL-38999 vs MIL-DTL-5015 vs MIL-DTL-26482

How the three common mil-spec circular connector standards — MIL-DTL-38999, 5015 and 26482 — differ in coupling and positioning, and what to check when choosing between them.

Read guide →

High-Speed & Data Center Connectors

Choosing a Backplane Connector: DIN 41612, Hard Metric and High-Speed Differential

How the three common backplane connector families (DIN 41612, 2 mm Hard Metric, high-speed differential) differ, and how to choose by data rate, density and press-fit process.

Read guide →

Board-to-Board (BTB) Connectors

Board-to-Board Connector Selection & Replacement Guide

How to select the right board-to-board connector by pitch, height, and pin count, with real in-stock LTconnector part numbers cross-referenced against their Molex and Hirose equivalents.

Read guide →

Automotive Connectors

High-Current & Automotive Connector Selection for Engineers

What actually determines reliability in high-current and automotive connectors — contact retention, contact resistance stability, and temperature class — and how to evaluate them without relying on unverified certification claims.

Read guide →

High-Speed & Data Center Connectors

High-Speed Connector Routing & Signal Integrity Considerations

The impedance-matching and layout principles that determine signal integrity in high-speed connector applications, and the questions to ask a connector supplier before committing to a design.

Read guide →

Automotive Connectors

FAKRA vs Mini-FAKRA: A Practical Selection Guide

The core differences, use cases, and selection criteria between FAKRA and Mini-FAKRA (HFM) for automotive RF connections.

Read guide →

Flexible Printed Circuits (FPC) & FPC/FFC Connectors

Rigid-Flex FPC Selection Guide for 5G mmWave Applications

Key material, mechanical, and impedance-control considerations when selecting rigid-flex FPC for 5G mmWave applications.

Read guide →

Automotive Connectors

IP67 vs IP68 Connectors: Which Automotive Sealing Rating Do You Need?

How IP67 and IP68 ingress protection ratings differ for automotive connectors, and how to decide which one your application actually needs.

Read guide →

Micro RF Connectors & Cable Assemblies

SMA vs MCX vs MMCX: How to Choose the Right RF Connector

The practical differences between SMA, MCX, and MMCX coaxial RF connectors, and how connector size and mating cycles should drive your choice.

Read guide →

Board-to-Board (BTB) Connectors

Board-to-Board Connector Stack Height: What It Means and How to Choose

What "stack height" means for board-to-board connectors, and how to pick the right value for your enclosure and PCB spacing.

Read guide →

Flexible Printed Circuits (FPC) & FPC/FFC Connectors

ZIF vs Non-ZIF FPC Connectors: Which One Fits Your Design

The practical trade-offs between ZIF and non-ZIF (flip-lock) FPC connectors, and how to decide which actuation type suits your assembly process.

Read guide →

Power & Terminal Connectors

Connector Pitch Explained: How to Measure It and Why It Matters

What connector pitch means, how to measure it correctly, and why getting it wrong is one of the most common wire-to-board connector mistakes.

Read guide →

Industrial & Circular Connectors

M8 vs M12 Circular Connectors: Key Differences and When to Use Each

The practical differences between M8 and M12 industrial circular connectors, and how to decide which fits your sensor or actuator application.

Read guide →

High-Speed & Data Center Connectors

QSFP-DD vs OSFP: Choosing the Right Pluggable Optical Module Form Factor

How QSFP-DD and OSFP pluggable optical form factors differ in size, power budget, and thermal capacity, and how to decide which fits your platform.

Read guide →

New Energy & EV Connectors

What Is a Manual Service Disconnect (MSD) and Why Every EV Battery Pack Needs One

What a manual service disconnect (MSD) does in an EV or energy-storage battery pack, and what to consider when specifying one.

Read guide →

Consumer Interface & Card Connectors

USB-C vs Lightning: Connector Differences Engineers Should Know

The mechanical and functional differences between USB-C and Lightning connectors, and what they mean for OEM/ODM product design.

Read guide →